Aerosol & Spray Product Warehousing

Aerosol & Spray Product Warehousing

Fire and dangerous-goods checks · Heat and sunlight protection · Leak prevention and packaging integrity · Labeling and batch control

What Aerosol and Spray Storage Has to Handle

An aerosol can is a pressure vessel and is normally managed as dangerous goods — sunscreen sprays and hairspray, for example, are commonly UN 1950 aerosols, classed as flammable gas or miscellaneous dangerous goods when they carry ethanol or hydrocarbon propellants. These goods usually require segregated storage away from ignition and heat sources, backed by fire management and emergency procedures.

The hotter the can, the higher the internal pressure. Prolonged heat or direct sunlight accelerates leakage, can deformation and content change, so the category normally calls for a light-protected, heat-free, temperature-controlled environment. Handling and stacking must also prevent tipping and crushing, so that dented cans, damaged nozzles or deformed cartons do not undermine packaging integrity.

Most spray products are beauty and personal-care goods: sunscreen sprays are special cosmetics requiring registration, while hydrating, setting and hair sprays are generally ordinary cosmetics under filing. Chinese labeling, batch numbers and shelf life still apply, and dispatch has to be recorded by batch with ledger-to-physical consistency. Whether we can take a given aerosol cargo follows from its MSDS, UN number and our actual zone conditions, checked item by item.

Settle these four first

  • check_circleRead the MSDS and UN number to separate class 2.1 flammable from class 2.2 non-flammable before fixing separation distances.
  • check_circleKeep cans out of direct sun and away from heat; the zone holds 22–25°C and summer loading avoids the midday dock.
  • check_circleInbound and outbound checks cover dented cans, clogged nozzles and crushed cartons; leaking units are isolated rather than racked.
  • check_circleBonded storage defers import tax to release, and a failed trial can go back.

A checklist for aerosol cans

Most aerosols are UN1950, class 2.1 or 2.2, with butane or propane propellants held as liquefied gas under pressure. Whether we can take them follows from the MSDS, the UN number and a real check of the zone, not from what the category is called.

local_fire_department

Fire and dangerous-goods checks

Start from the cargo MSDS and UN number to establish dangerous-goods status, segregation requirements and emergency procedures, then check whether our zone can take it.

thermometer

Heat, sunlight and light protection

Heat raises internal can pressure and speeds up content change, so the category normally needs a shaded, temperature-controlled environment away from heat sources.

inventory_2

Packaging integrity and batch control

Prevent tipping and crushing in handling and stacking; check can, nozzle and carton condition at inbound and outbound; record shelf life by batch and rotate FIFO.

Confirmed zone conditions

Leasable area, bonded zone
4,170㎡
Leasable area, non-bonded zone
1,500㎡
Leasable area, climate-controlled zone
1,000㎡
Climate-controlled zone temperature range
22–25℃
Climate-controlled zone humidity (automatic)
40-60%
Temperature and humidity monitoring
24/7

Areas and climate figures come from our published fact set. Whether we can take your specific aerosol cargo must follow from the MSDS, the UN number and an actual zone condition check — we will not promise acceptance before that check is done.

Checks before inbound

Can aerosol sprays be stored with you?

Start with the MSDS and UN number: establish the dangerous-goods status and the storage and fire conditions required, then check them against our actual zone conditions item by item. Where conditions do not match, or cannot be confirmed, we will not promise acceptance.

How much does temperature matter for aerosol cans?

A lot. Heat raises internal pressure, and prolonged heat or direct sunlight accelerates leakage and content change — hence the category's usual need for shade, distance from heat sources and controlled temperature.

Do sunscreen sprays and ordinary hydrating sprays follow the same rules?

Not exactly. Sunscreen sprays are special cosmetics and need registration before import, while most hydrating and setting sprays are filed as ordinary cosmetics. Cosmetic sprays also carry the same Chinese labeling, batch and shelf-life obligations.

Need to check aerosol and spray storage conditions?

Send the MSDS, UN number, can volume and units per carton; we check storage, fire and stacking conditions item by item and say which parts we can take.

Warehouse resources

3 matching zones

YX-BONDEDHONGQIAO

Import Bonded Warehouse

For goods requiring bonded storage and coordinated inbound and outbound procedures. Confirm the plan against customs status, destination and handling needs.

Zone area
4,170 m²

Available space, minimum rental area and pricing are confirmed on request.

View zone →
YX-GENERALHONGQIAO

General Warehouse

For ordinary goods that do not require bonded supervision. Plan storage around packaging, turnover and delivery requirements.

Zone area
1,500 m²

Available space, minimum rental area and pricing are confirmed on request.

View zone →
YX-TEMP-CONTROLLEDHONGQIAO

Temperature & Humidity Controlled Warehouse

For goods with defined temperature and humidity requirements. The temperature-controlled warehouse guarantees 22–25°C; confirm cargo specifications and operating conditions before receiving.

Zone area
1,000 m²
Temperature range (adjustable)
22–25℃

Available space, minimum rental area and pricing are confirmed on request.

View zone →
Warehouse knowledge center →