← Processing & service management

YUNXIU / OPERATIONS GUIDE

How to compare pallet-based and cubic-metre storage quotes

Different billing units do not establish which warehouse is cheaper. Compare the same stock profile, storage period and handling workload before comparing totals. This method is an enquiry worksheet, not a Yunxiu tariff or a promise of achievable space utilisation.

Yunxiu · Operations planning reference · Updated 8 November 2026

Define what each unit measures

A cubic-metre quote may measure cartons, the outer envelope of a loaded pallet, or a contractual chargeable volume. A pallet quote may distinguish standard, overheight and irregular loads. Obtain written definitions for size limits, rounding and minimum charges. Geometric fit alone does not establish a safe stacking plan: product restrictions, racking loads and access space also matter.

  • Record carton dimensions and gross weight.
  • State maximum stacking layers and orientation.
  • Confirm whether actual, peak or minimum committed occupancy is billed.

Run the same stock profile through both methods

For an explicitly hypothetical example, 100 cartons at 0.06 cubic metres each total six cubic metres of carton volume. If the agreed handling arrangement needs five pallets, evaluate six cubic metres or five pallet positions as applicable. If the volume tariff uses the loaded-pallet envelope, six cubic metres is not the correct input. Use daily receipts, dispatches and balances rather than the lowest month-end stock figure.

  • Worksheet fields: date, cartons, pallets, chargeable volume and evidence.
  • Include partial pallets created by picking.
  • Replace all example values with verified packaging data.

Add handling separately from storage

Compare receiving, palletising, depalletising, relocation, checking and dispatch charges after aligning storage units. A cheaper storage rate can be offset by frequent picking. Separate one-off and recurring charges, identify consumables and tax treatment, and record included operations. If activity is uncertain, model both low-frequency and high-frequency handling rather than assuming full-pallet movements throughout.

  • Keep each fee in its original unit.
  • Record included operations and excess charges.
  • Compare mobilisation, steady-state and exit months.

Resolve differences that cannot be converted mathematically

Do not rank totals as equivalent if temperature conditions, customs status, acceptance restrictions or liability arrangements differ. Keep these in a separate conditions column. Ask each provider to confirm an executable pallet plan. Retain the packaging evidence, quote version and calculation date so changes in product dimensions or turnover trigger a fresh comparison.

  • Show total cost alongside exclusions.
  • Flag unresolved overheight, overweight or non-stackable loads.
  • Retain the quote owner and validity period.

Before you proceed

  • Verify dimensions and weights.
  • Obtain a written volume definition.
  • Align occupancy periods and minimum charges.
  • Compare handling and consumables separately.

Related operations

Review the cargo and the work together

Share the product, packaging, batches and quantities, customs status, expected schedule and the special requirements discussed here. Confirm acceptance before arranging delivery.