← Receiving & handover

YUNXIU / OPERATIONS GUIDE

Oversized or overweight pallets: what to check before unloading

A pallet fitting inside a truck does not mean it can be unloaded safely or stored in the intended location. Excess height, weight, an off-centre load and loose packaging are different problems. Provide actual dimensions, gross weight and photographs before dispatch. If the discrepancy is discovered on arrival, stop routine unloading and reassess the plan.

Yunxiu · Operations planning reference · Updated 8 November 2026

Verify what was measured

Dimensions must include the pallet, overhang, protection and protruding straps. Confirm whether weight includes packaging. Product net weight is not handling weight. Uneven machinery or tall stacked cartons may also require centre-of-gravity information, fork-entry direction and prohibited lifting points.

  • Retain the weighing or packaging specification.
  • Record leaning and overhang separately from dimensions.

Check the entire handling route

The site must assess equipment, vehicle access, doorways, turning space and the destination location. Passing through one point does not establish a safe end-to-end route. Floor storage capability is not rack capacity. Do not ask staff to test an uncertain lift by tilting or improvising support.

  • Confirm the storage arrangement before unloading.
  • Do not use a trial lift as the safety assessment.

Do not assume splitting is possible

Reducing height or weight can require unwrapping, opening packages and rebuilding pallets. Obtain approval for any change that may affect protection, labels or traceability. Splitting creates additional packaging, identification and counting work and may change the charging unit. An indivisible load needs a different confirmed handling arrangement.

  • Record quantities before and after rebuilding.
  • Identify responsibility for replacement packaging.

Document the exception and next movement

Compare measured values and photographs with the booking. State whether the cargo remains on the vehicle or is in an approved holding area. The nominated owner should coordinate waiting, redirection or a new booking. Record actual times and work without inventing liability or waiving fees.

  • Do not describe unoffloaded cargo as received.
  • Update supplier packing requirements before the next shipment.

Before you proceed

  • Gross dimensions and weight checked
  • Equipment, route and storage checked
  • Splitting approved where relevant
  • Exception status and timeline preserved

Related operations

Review the cargo and the work together

Share the product, packaging, batches and quantities, customs status, expected schedule and the special requirements discussed here. Confirm acceptance before arranging delivery.